96kHz采样率，32位DSP芯片处理，24 bit AD/DA转换。
输入处理部分包含高切，低切，8个参量均衡，噪声门，增益，静音，相位，延时，连动调节等处理功能。
输出处理部分包含分频，9个参量均衡，增益，静音，压缩/限幅器，相位，延时，连动调节等处理单元。
所有通道的PEQ增益、带宽、频率连续可调，类型可选择: 参量均衡、低架滤波、高架滤波、低切滤波、高架滤波、移相1阶、移相2阶。
所有输入输出之间可以自由进行矩阵式分配，且每个输入输出通道名称可以更改。
所有输入输出通道带独立的相位曲线调整功能，在PEQ类型选择移相1阶是180度曲线调整，移相2阶是360度曲线调整。
所有高切、低切滤波器，分频器的类型可选择：巴特沃斯、林奎瑞利、贝塞尔，斜率在-6dB/Oct至-48dB/Oct可选可选。
输出通道的压缩/限幅器的阀值，比率，启动时间，恢复时间连续可调。
所有输入输出通道的延时模块都具有高达680ms的延时时间。
任意通道之间参数设置可以自由复制，以及任意通道可以进行连动调节。
可在任意一个输入或输出通道时看到当前所有的输入或输出通道的PEQ曲线调整图。
内置测试信号发生器，输出方式可选粉红噪声，白噪声及20Hz-20kHz正弦波可调，信号幅度可调。
前面板带有输入输出电平指示灯、 USB控制端口，后面板232&485控制端口，一键式连机使得用户的操作更简易、快捷。
3 0个用户预设，1个出厂预设， 整机状态和每个预设都可以单独存储和调用。ID设置功能可以级联控制255台机器，还具有密码保护功能，使备更安全。
DP Series Digital Matrix Processor
- 96kHz sampling rate, 32-bit DSP chip processing, 24-bit AD/DA conversion.
- Input processing section includes high-pass filter, low-pass filter, 8-band parametric EQ, noise gate, gain control, mute function, phase adjustment, delay, and ganged control.
- Output processing section includes crossover, 9-band parametric EQ, gain control, mute function, compressor/limiter, phase adjustment, delay, and ganged control.
- For all channels, PEQ gain, bandwidth, and frequency are continuously adjustable; PEQ types selectable: Parametric EQ, Low-Shelf Filter, High-Shelf Filter, High-Pass Filter, Low-Pass Filter, 1st-order Phase Shift, 2nd-order Phase Shift.
- Free matrix routing between all inputs and outputs; each input/output channel name can be customized.
- Independent phase curve adjustment for all input/output channels: 180° phase shift with 1st-order phase selection, 360° phase shift with 2nd-order phase selection.
- Filter types selectable for all high-pass filters, low-pass filters, and crossovers: Butterworth, Linkwitz-Riley, Bessel; slope adjustable from -6dB/Oct to -48dB/Oct.
- Threshold, ratio, attack time, and release time of the compressor/limiter for output channels are continuously adjustable.
- Delay modules for all input/output channels support up to 680ms delay time.
- Parameter settings can be freely copied between any channels; ganged control available for any channels.
- Real-time PEQ curve display for all input/output channels when adjusting any single channel.
- Built-in test signal generator: output types selectable (pink noise, white noise, 20Hz-20kHz adjustable sine wave); signal amplitude adjustable.
- Front panel features input/output level indicators and USB control port; rear panel equipped with RS232&485 control ports. One-key synchronization enables simple and quick operation.
- 30 user presets + 1 factory preset; overall device status and individual presets can be stored and recalled separately. ID setting supports cascaded control of up to 255 units; password protection ensures device security.